Tel: 081-922-8262
Mail: [email protected]
Air Power Take-Offs
Wichita's Air PTO is powered by our heavy-duty Standard Vent clutch. With large friction areas for high energy starts and an air actuated clutch for remote or automatic control of the PTO.
อ่านเพิ่ม
AirMakks SSB Brakes
Air Cooled, Spring-Set Air Release Brake
The AirMaKKs SSB is designed to provide low speed braking assistance in applications including conveyors, cranes and drawworks where they serve as a main brake that provides both parking and E-stop braking functions.
AirMaKKs SSB models utilize the basic, easy-to-maintain, pin-style, modular design of AquaMaKKs including the brake housing with torque plates installed instead of water jackets. Models are available in the 19, 25, 36 & 48 inch AquaMaKKs sizes.
อ่านเพิ่ม
AquaMakks Water Cooled Clutches & Brakes
AquaMaKKs water cooled clutches and brakes are designed to provide accurate torque control for heavy-duty tensioning applications.
AquaMakks™ clutches and brakes are pneumatically or hydraulically controlled and water cooled. They consist of a series of alternating friction discs and water jackets. Torque is transmitted by applying axial force from the pneumatic, hydraulic, or spring set actuator. Copper wear plates are used for excellent heat dissipation. Models are available in 19", 25", and 36" diameter sizes. Torque ranges from 55,440 in.lb. @ 80 PSI to 1,596,000 in.lbs. @ 100 PSI.
อ่านเพิ่ม
ATT Series Advanced Technology
Designed for intermediate web tension ranges. Three size ranges.
อ่านเพิ่ม
CBA Clutch Brakes
The Model CBA is an oil immersed, combination clutch/brake, utilizing a self-contained cooling oil pumping system. It is a quill-mounted unit that may be used for either end of shaft or through-shaft designs. The Model CBA is designed to be compatible and complementary to our dry units.
อ่านเพิ่ม
CBC-100 Series
Single Channel Capacity The CBC-100 mounts inside a standard Warner Electric conduit box and includes rectification and suppression circuits
อ่านเพิ่ม
CBC-140 Series
CBC-140-1
Half Wave Power Supply provides a 103.5 DC output for clutches/brakes that require up to one amp of current.CBC-140-2
Full wave power supply provides 24, 103.5 or 207 volts DC output for clutches or brakes that require up to 2 amps of current
CBC-150 Series
Dual Channel Capacity The CBC-150 replaces the cover on the standard module conduit box. Provides rectification and suppression for two devices. Green LED indicates power to clutch. Red LED indicates power to brake.
อ่านเพิ่ม
CBC-160 Series
Electrically Released Brake Control The CBC-160 clutch/brake control provides a single 90 VDC adjustable output for use with any clutch/brake unit. The adjustable output will provide consistent and repeatable release for Warner Electric's 90 VDC permanent magnet electrically released brakes. The CBC-160 mounts as the cover on the standard module conduit box.
อ่านเพิ่ม
CBC-200 Series Controls
Dual Channel, Single Torque Adjustable The CBC-200 is a dual channel control with one adjustable current and one fixed voltage. Switch selection tunes the control to exactly match power requirements and operating characteristics of each clutch or brake. Individual torque adjustment allows preset maximum torque tailored to the application's requirements. The adjustable torque channel can be used with an electrically released brake.
CBC-300 Series
Dual Channel, Dual Torque Adjustable The CBC-300 has two adjustable current channels. Switch selection tunes the control to exactly match power requirements and operating characteristics of each clutch or brake. Individual torque adjustment allows preset maximum torque tailored to the application's requirements.