Tel: 081-922-8262
Mail: [email protected]
CT/CV series
CT/CV series asynchronous servomotors are used primarily when high external mass moments of inertia acting on the motor shaft must be reliably controlled. The particularly compact unit, which consists of a gear unit and sturdy asynchronous servomotor in four speed classes, and has a high-resolution sin/cos encoder, achieves high speed consistency even at low speeds. Reliable and precise positioning of asynchronous servomotors is possible with the CFC control mode of the MOVIDRIVE® inverters and MOVIAXIS® servo inverters at peak values up to 300% of the rated motor torque.
อ่านเพิ่ม
DS/CM series
|
SEW designed these new synchronous servo motors specifically for highly dynamic applications like material handling, packaging, crane and hoist control. The CM motor series is available in three sizes, with three lengths for each size. They cover the torque range between 5 and 68 Nm static torque. They come equipped with high-energy NdFeB magnets that deliver a very high overload capacity of 400% standstill current as standard. The modern technology of the magnetic circuit assures high rotational accuracy and low cogging. For static torques of 1 to 4 Nm, the DS series provides the ideal low power solution and is also available in three lengths. The acceleration torques of these motors are three to four times the static torque for all sizes. All motors come equipped with standard thermal motor protection and resolver feedback for motor control.
|
SEW CMP/CMD SERIES
Highest dynamic characteristics
thanks to the modern winding and magnet technology – over the entire speed range, of course.
Compact design
for use in confined spaces.
Custom-tailored drive solutions
because the motor can be directly mounted on a gear unit from our proven modular gear unit system.
อ่านเพิ่ม
SEW Gearboxes Repair
SEW Gearbox Repair and Maintenance Services
When it comes to maintenance and repair, we have the capabilities to provide services to maintain your SEW gears and motors in excellent conditions. Our team includes a group of talented engineers, who utilize their experience to analyze, identify, and repair any problems you may have with your gearbox or motor. We can enhance the performance of your gear unit in terms of torque ratings, output speeds, and energy efficiency to name a few. Our Manufacturing, Repair and Maintenance Services Include:- Re-chroming Services
- Welding and Fabrication
- Reverse Engineering Capabilities
- Shaft and Roller Repair, and Build-ups
- Custom Fabrication of Replacement Parts
- Gear Hobbing and Grinding both Internal and OD to AGMA12
SEW SL2 SERIES
SL2 synchronous linear servomotors
Powerful dynamics High travel speeds and optimum positioning allow the achievement of powerful dynamics. Simplified project planning No need to check the ratio between the motor’s moment and the external moment of inertia. Reduced maintenance Wear parts such as spindles, ball bearings, and toothed belts are no longer required. Reduced noise levels Less noise produced, even with high supply voltages.
Type F : Parallel Shaft Helical Gearmotor
The particularly slim-fit parallel-shaft helical gear units are used wherever space is limited. Various mounting positions and designs make for a large range of applications even under adverse conditions. Thanks to its design characteristics and its large torque range from 120 to 18,000 Nm, this standard gear unit is the ideal solution for many materials handling and process engineering applications.
อ่านเพิ่ม
Type K : Helical-Bevel Gearmotor
The compact design of all our gear units is most obvious in our helical-bevel gear units. They are sophisticated right-angle gear units for all engineering applications that require space-saving installation. At the same time, they offer a powerful torque range from 200 to 50,000 Nm. They ensure a remarkably high degree of efficiency of more than 96 per cent in both directions of rotation and for any input speed. A gear unit built to last: The gearing is designed for high endurance and makes for a high-torque, wear-free drive.
อ่านเพิ่ม
Type R : Helical Gearmotor
Six single-stage and fourteen two- and threestage sizes covering a power range from 50 to 18,000 Nm: Our helical gear units always offer an optimum ratio between performance and space requirements. The fine graduation and variety of torque ratings and gear ratios is peerless. They also satisfy demands for high output speeds or low weight due to the many available sizes.
อ่านเพิ่ม
Type S : Helical Worm Gearmotor
The strength of helical-worm gear units is their simple mechanical structure. Tailored individually to torque and speed requirements, they save installation space and costs when implemented in simple applications. In addition to the large gear ratio in the worm gear stage, our helical-worm gear units also offer a significantly higher level of efficiency than mere worm gear units. Power is transmitted linearly to the drive shaft and the torque shocks are reduced – making for a low noise level. Their torque range runs from 92 to 4,000 Nm.
อ่านเพิ่ม
Type W : Spiroplan® Gearmotor
The SPIROPLAN® right-angle gearmotors do their job reliably and quietly: In the power range from 0.09 to 4.0 kW, the SPIROPLAN® series provides output torques up to 180 Nm – its wear-free gearing ensuring very quiet operation. In combination with the compact design and the lightweight aluminum housing, the noise level is almost perfectly low. The oil fill is independent of the mounting position, which means SPIROPLAN® gearmotors can be used universally while requiring almost no maintenance. The gear ratio range offers very high output speeds and optimized mechanical efficiency
อ่านเพิ่ม